▸High-Density Sheet Construction: The denser ceramic fiber structure is suitable for insulation assemblies where compact sheet material is preferred over lower-density flexible roll insulation.
▸Easy to Cut and Fit: The sheet format allows AGT-CFF1260 to be cut and fitted according to furnace, kiln and equipment geometry, simplifying integration into defined insulation areas.
▸Multiple Thickness and Density Options: Different configurations are available to support varying insulation-build requirements, installation spaces and system designs.
▸Designed for High-Temperature Insulation: AGT-CFF1260 is developed for integration into furnace lining, backup insulation, kiln insulation and other high-temperature thermal equipment systems.
Ceramic fiber felt and ceramic fiber blanket are both used in high-temperature insulation systems, but they serve different installation requirements. Ceramic fiber felt is a higher-density sheet material designed for cut-to-fit applications, while ceramic fiber blanket is a lower-density flexible material typically supplied in rolls.
| Property | Ceramic Fiber Felt | Ceramic Fiber Blanket |
|---|---|---|
| Supply Form | Sheet | Flexible Roll |
| Density | 200 / 220 kg/m³ | 64 / 96 / 128 / 160 kg/m³ |
| Standard Format | 600 × 400 mm sheet | 610 mm wide roll |
| Installation | Cut and fit | Wrap, layer or line |
| General Positioning | Dense sheet insulation | Flexible insulation |
A higher-density sheet material is required.
Defined sheet dimensions simplify installation.
Insulation components need to be cut to specific shapes or dimensions.
Furnace or equipment geometry is suitable for sheet installation.
Flexible insulation is required.
Large surfaces require continuous insulation coverage.
Curved or irregular equipment needs to be wrapped.
A lower-density flexible insulation layer is preferred.
Ceramic fiber insulation should be selected according to the complete operating environment rather than classification temperature alone. Important selection factors include:
Continuous operating temperature
Maximum short-term temperature
Required insulation thickness
Density requirement
Furnace or equipment geometry
Hot-face construction
Mechanical conditions
Installation method
Overall insulation-system design
Note: The 1260°C classification temperature should not automatically be used as the continuous operating temperature. For project selection, provide Airgeltech with the operating conditions and insulation-system requirements so that the appropriate ceramic fiber grade and configuration can be evaluated.
AGT-CFF1260 Ceramic Fiber Felt can be cut and fitted according to the dimensions of the furnace, kiln or high-temperature equipment. Installation methods should be determined according to the lining structure, operating temperature, substrate condition, mechanical requirements, insulation thickness and fixing method.
The overall thermal performance of an installation should be evaluated at the complete insulation-system level, rather than based on the ceramic fiber felt alone.
Before handling or installation, refer to the applicable Airgeltech Safety Data Sheet. Follow local occupational health requirements and appropriate dust-control and personal protective measures when cutting or installing ceramic fiber products.
No. 1260°C is the classification temperature, not the recommended continuous service temperature for every application. Actual service limits depend on operating conditions, exposure duration, atmosphere and the complete insulation-system design.
AGT-CFF1260 is available in standard thicknesses of: 20 mm, 50 mm. Nominal density options are: 200 kg/m³, 220 kg/m³.
The appropriate configuration should be selected according to the insulation-system requirements and installation conditions.
Ceramic fiber felt is a higher-density sheet material, while ceramic fiber blanket is a lower-density flexible roll material. Ceramic fiber felt is better suited to defined sheet components and cut-to-fit applications. Ceramic fiber blanket is generally more suitable for covering large areas, building insulation layers and wrapping curved or irregular equipment.
Yes. The sheet material can be cut and fitted according to equipment dimensions and insulation-layout requirements. For project-specific dimensions or fabrication requirements, provide Airgeltech with the required size, quantity and intended application for evaluation.
Yes. For sample or technical evaluation, please provide:
Operating temperature
Maximum temperature
Required thickness
Preferred density
Application
Estimated quantity
Destination country
Airgeltech can then confirm the appropriate product configuration and available technical documentation.
Get In Touch With Us
