Aerogel Insulation Blanket

AIRG-F Aerogel Insulation Blanket - The next-generation high-performance thermal insulation material, utilizing nano-composite technology and special fiber reinforcement, maintains stable performance under long-term 650°C service and short-term 950°C high-temperature exposure, with an ultra-low thermal conductivity of 0.021 W/(m·K).Featuring a breakthrough ultra-thin design (75% thinner than traditional materials) combined with flexible and compression-resistant properties, it perfectly fits complex piping systems, vibrating equipment, and industrial applications requiring frequent maintenance, improving installation efficiency by over 30%.

Next Product Inquire Now

AIRG‑F Aerogel Insulation Blanket

Flexible silica‑aerogel blanket laminated with high‑temperature fibers; delivers ultra‑low thermal conductivity in a thin, vibration‑tolerant format for pipelines, equipment, and building envelopes.

Key metrics:

· Thermal conductivity: 0.013 - 0.021  W·m⁻¹·K⁻¹

· Design thermal conductivity (650 °C): ≈ 0.021  W·m⁻¹·K⁻¹

· Service temperature (continuous): 300 °C - 950 °C

· Short‑term excursion: up to 950 °C

· Density: 160 - 240 kg m⁻³

· Blanket thickness: 75 % thinner than conventional lagging for equivalent R‑value

· Compressive strength: ≥ 0.15 MPa

· Hydrophobicity: ≥ 99.5 % water contact rejection

· Expected service life: > 20 years in industrial duty

Why choose AIRG‑F?

· Best‑in‑class insulation-5× lower λ than mineral wool, resulting in 75-80 % thickness savings

· High‑temperature stability: continuous operation to 950 °C with Class A non‑combustible rating

· Flexible & vibration‑resistant: conforms to tight bends and resists mechanical shock-ideal for space‑constrained or mobile systems

· Lightweight installation: lowers structural load and cuts installation labour by > 30 %

· Durable & clean: hydrophobic, dust‑free surface extends maintenance intervals and equipment life

Product Series Technical Parameters

Specification	AIRG-F300	AIRG-F450	AIRG-F650-S	AIRG-F650-A	AIRG-F950-A	Test Method
Thickness (mm)	3/5/10/20 (custom)	3/5/10/20 (custom)	3/5/10/20 (custom)	3/5/10/20 (custom)	3/5/10/20 (custom)	-
Width (mm)	1500	1500	1500	1500	1500	-
Color	White	White	White	White	White	-
Appearance	Sheets/Rolls	Sheets/Rolls	Sheets/Rolls	Sheets/Rolls	Sheets/Rolls	-
Service Temperature (°C)	<300	<450	<650	<650	<950	-
Thermal Conductivity [W·m⁻¹·K⁻¹] (25 °C)	≤0.020	≤0.020	≤0.017	≤0.021	≤0.021	GB/T 34336
Thermal Conductivity [W·m⁻¹·K⁻¹] (300 °C)	-	-	-	≤0.036	≤0.036	GJN008-2022
Hydrophobicity Rate (%)	≥98	≥98	≥98	≥98	≥98	GB/T 10299
Flammability Rating	A	A	A	A	A	GB/T 8624
Density (kg/m³)	160-240	160-240	160 ± 20	180 ± 20	180 ± 20	-
Compression Resilience Rate (%)	≥96	≥96	≥99	≥90	≥90	GB/T 13480
Vibration-induced Mass Loss Rate (%)	≤0.3	≤0.3	≤0.1	≤0.1	≤0.1	GB/T 34336
Airborne Sound Insulation (10 mm) (dB)	20	20	20	20	20	GB/T 19889.3
Permanent Linear Change (PLC) (%)	≥-1	≥-1	≥-1	≥-1	≥-1	-

Notes:

· All products are flexible, roll or sheet form aerogel insulation blankets, available in standard and custom thicknesses.

· Service Temperature refers to the recommended maximum continuous operating temperature.

· Thermal Conductivity is tested at both room temperature (25 °C) and, for high-performance grades, at 300 °C; values reflect typical as-produced samples.

· Hydrophobicity Rate denotes the water-repellent property, measured per GB/T 10299.

· Compression Resilience Rate and Vibration-induced Mass Loss Rate evaluate mechanical durability under repeated stress and vibration.

· Airborne Sound Insulation values are measured for a 10 mm sample.

· Permanent Linear Change (PLC) indicates dimensional stability after heating.

· All data are typical values for reference only. For application-specific or custom requirements, contact technical support.

Aerogel Insulation Blanket

AIRG‑F Aerogel Insulation Blanket

Key metrics:

Why choose AIRG‑F?

Product Series Technical Parameters

Typical applications